贺西煤矿刮板输送机链轮链窝磨损原因仿真模拟分析
任晋平
山西焦煤集团汾西矿业 贺西煤矿,山西 柳林 033300
Simulation analysis of wear causes of sprocket chain nest of scraper conveyor in Hexi Coal Mine
Ren Jinping
Shanxi Coking Coal Group Fenxi Mining Hexi Coal Mine, Liulin 033300, China
摘要 针对贺西煤矿SGB620/40T型刮板输送机链轮磨损问题,借助ANSYS有限元仿真分析方法,建立了链轮与圆环链配合模型,开展了链轮磨损原因分析工作。结果表明,链轮工作过程中链窝应力集中是其出现磨损的主要原因。通过分析链轮工作过程中的总变形情况,得出链轮链窝磨损较大时极易出现链轮断齿故障,并提出了优化策略。
关键词 :
刮板输送机 ,
链轮 ,
链窝磨损 ,
仿真模拟
Abstract : Aiming at the problem of sprocket wear of SGB620 / 40 T scraper conveyor in Hexi Coal Mine, the model of sprocket and ring chain was established by means of ANSYS finite element simulation analysis method, and the cause analysis of sprocket wear was carried out. The results show that the stress concentration of the chain socket is the main reason for the wear of the sprocket. By analyzing the total deformation of the sprocket in the working process, it is concluded that the sprocket tooth breakage fault is easy to occur when the sprocket socket wears greatly, and the optimization strategy is proposed.
Key words :
scraper conveyor
chain wheel
chain socket wear
simulation
作者简介 : 任晋平( 1989— ),男,山西中阳人,助理工程师。
1 ] 黄应勇,曾 林. 刮板输送机链轮磨损分析[ J ]. 煤矿机械,2012,33( 7 ):119 - 120.
[ 2 ] 王淑平,杨兆建,,王学文. 刮板输送机驱动链轮磨损与啮合力学行为[ J ]. 煤炭学报,2014,39( 1 ):166 - 171.
[ 3 ] 杨志怀. 基于ANSYS的矿用刮板输送机链轮与链环啮合特性分析[ J ]. 煤矿现代化,2020( 3 ):130 - 132.
[ 4 ] 王九怀. 刮板输送机驱动链轮结构的优化研究分析[ J ]. 机械管理开发,2020,35( 5 ):88 - 89.
[ 5 ] 宋智丽,黄建斌,张永军,等. 基于逆向工程技术分析链轮磨损[ J ]. 煤矿机械,2014,35( 11 ):134 - 135.
[ 6 ] 王淑平,杨兆建,王学文. 刮板输送机链轮磨损与圆环链形变之间的关系[ J ]. 中国机械工程,2014,25( 12 ):1 586 - 1 590.
[1]
李亚雄. 矸石充填刮板输送机的改造研制及应用 [J]. 煤炭与化工, 2023, 46(3): 93-95.
[2]
杨 纪. 刮板输送机中部槽冲击损伤及分析研究 [J]. 煤炭与化工, 2023, 46(1): 86-88.
[3]
赵小宁. 沙坪洗煤厂刮板输送机故障分析与改进措施 [J]. 煤炭与化工, 2022, 45(2): 67-70.
[4]
范少杰. 刮板输送机动力学特性仿真与试验研究 [J]. 煤炭与化工, 2022, 45(2): 81-83.
[5]
郭锋涛. 刮板运输机链轮组件密封实效及优化设计研究 [J]. 煤炭与化工, 2022, 45(11): 100-103.
[6]
任晓峰1,何慧芳2. 综放工作面超长距离供液技术应用研究 [J]. 煤炭与化工, 2022, 45(11): 95-99.
[7]
吕 璐. 矿用刮板输送机中部槽结构摩擦接触及优化改进研究 [J]. 煤炭与化工, 2021, 44(9): 74- 76..
[8]
让淑领. 基于ALOHA软件的某化工企业苯泄漏扩散模拟研究 [J]. 煤炭与化工, 2021, 44(7): 151-154..
[9]
闫 岩. 基于Ventsim模型矿井通风优化研究 [J]. 煤炭与化工, 2021, 44(6): 115-117.
[10]
焦晋锋. SGZ630220刮板输送机直驱控制系统的仿真分析 [J]. 煤炭与化工, 2020, 43(7): 79-81.
[11]
司利鹏. 刮板输送机驱动链轮接触应力分析与优化改进 [J]. 煤炭与化工, 2020, 43(7): 82-84.
[12]
郭伟强. 矿井三维可视化通风仿真模拟技术的研究与应用 [J]. 煤炭与化工, 2020, 43(4): 78-80.
[13]
张建国. 刮板输送机链轮链环啮合情况分析及优化改进 [J]. 煤炭与化工, 2020, 43(3): 75-77.
[14]
刘全喜. 矿用刮板输送机中部槽结构的优化设计及应用 [J]. 煤炭与化工, 2020, 43(12): 75-77.
[15]
莫 凡,常爱军. 矿用刮板输送机断链事故原因及防范措施 [J]. 煤炭与化工, 2020, 43(11): 91-93.