Abstract： In order to solve the problem of poor bonding between flame retardant plate and thin wood veneer, a new solution of preparing polyacrylate adhesive was presented after analysis of flame retardant surface morphology and characteristics. A two-component polyurethane-type adhesive was prepared by mixing?isocyanate curing agent and polyacrylate oligomer?with hydroxy group which was synthesized by free radical polymerization, followed by formula optimization, the adhesive reached a good bonding effect between the poplar wood veneer and the flame retardant plate and the bonding strength was evaluated by indirect method (shear strength) and direct method (wood veneer residue rate), respectively. The results showed that when the glass transition temperature (Tg) of the synthesized polyacrylate oligomer was 20 ℃, the hydroxyl value of the synthesized polyacrylate oligomer was 25 mg KOH/g, the ratio of the main agent and the curing agent was 5∶1, and the amount of nano calcium carbonate filler was 30%, the best bonding effect was achieved, with 3.10 MPa shear strength?and 85% wood veneer residue rate.
张 伟1，周 健2，次立杰2，苏翠伟1，胡江浦2，陈 石1，王 康2，许炳琨1. 阻燃板贴木皮胶粘剂的制备[J]. 煤炭与化工, 2023, 46(7): 122-126，130..
Zhang Wei1, Zhou Jian2, Ci Lijie2, Su Cuiwei1, Hu Jiangpu2, Chen Shi1, Wang Kang2, Xu Bingkun1. Preparation of adhesive for flame retardant board with thin wood veneer and study on the bonding property. CCI, 2023, 46(7): 122-126，130..
[ 1 ] 陈莲英，张明昕，陈登龙. 氮磷硼复合膨胀型木材阻燃剂改性木材的FTIR分析[ J ]. 科技资讯，2009（ 6 ）：52 - 53.
[ 2 ] Shui-Yu Lu, Ian Hamerton. Recent developments in the chemistry of halogen-free flame retardant polymers[ J ]. Progress in Polymer Science, 2002, 27（ 1）: 1 661 - 1 712.
[ 3 ] 朱海龙. 阻燃胶黏剂的制备及其应用研究[ D ]. 中国林业科学研究院，2013.
[ 4 ] Cheng R X, Wang Q W. The Influence of FRW-1 Fire Retardant Treatment on the Bonding of Plywood. J. Adhes. Sci. Technol. 2011（ 25 ）: 1 715 - 1 724.
[ 5 ] 李晓东. 木材阻燃浸渍处理方法及新的技术[ J ]. 辽宁化工，2005，34（ 10 ）：39 - 42.
[ 6 ] Wang Y C, Zhao J P. Preliminary study on decanoic/palmitic eut-
ectic mixture modifified silica fume geopolymer-based coating forflame retardant plywood[ J ]. Constr. Build. Mater. 2018（ 189 ）：1 - 7.
[ 7 ] Chuang C S, Yang T H, Tsai K C, et al. Fire retardancy and CO
/CO2 emission of intumescent coatings on thin plywood panel with waterborne vinyl acetate-acrylic resin[ J ]. Wood Sci. Technol. 2013（ 47 ）: 353 - 367.
[ 8 ] Su W Y, Subyakto S, Hata T, et al. Improvement of fire retardancy of plywood by incorporating boron or phosphate compounds in the glue[ J ]. J. Wood Sci. 1998（ 44）: 131 - 136.
[ 9 ] Wang W, Zammarano M, Shields J R, et al. A novel application of silicone-based flame-retardant adhesive in plywood[ J ]. Constr. Build. Mater. 2018（189 ）: 448 - 459.
[ 10 ] G V Plotnikova, A N Egorov, A K Khaliullin. Flame Retardants for Wood, Based on Urea-Formaldehyde Resin with Mineral Fillers[ J ]. Macromolecular Chemistry and Polymeric Materiales, 2003, 76（ 2 ）: 320 - 323.
[ 11 ] Wang Y, Hou M, Zhang Q, et al. Organophosphorus Flame Retar-
dants and Plasticizers in Building and Decoration Materials and Their Potential Burdens in Newly Decorated Houses in China[ J ]. Environ. Sci. Technol. 2017（ 51 ）: 10 991 - 10 999.
[ 12 ] China Forestry Statistical Yearbook[ M ]. China Forestry Publish-
ing House: Beijing, China, 2018.
