There are two working faces on the upper part of the 28102 working face of Zhenchengdi Mine, which are 22108 and 22201 working faces, both of which have been mined. By analyzing the principle of surrounding rock control technology of roadway and combining with the actual situation of roadway, it is determined that the coal seam mining roadway adopts the anchor net type steel shed joint support form. In order to analyze the effect of roadway support after 28102 working face mining, the field measurement method was used for research. It can be seen from the observation results that the maximum displacement of the top and bottom plates in the two sections is 7.4% of the section size of the roadway, and the maximum displacement of the two sections is 2.4% of the section size of the roadway, and the surface deformation of the roadway is small. The variation of all the monitoring anchors force is small, indicating that the force of the anchor is relatively stable and the selection of the supporting parameters is reasonable. It can be seen that the support method of the steel wire shed with the anchor cable can control the surrounding rock of the roadway well, and can ensure the safe and normal use of the roadway.