Study on the layout position of mining roadway under the structure of insufficient caving in goaf
Song Hu1, Zhang Xiaojun2, Long Ying2, Liu Yaning2, Zhong Jianbing2
1. College of Energy and Mining Engineering, Shandong University of Science and Technology, Qingdao 266590, China;
2. China Coal Energy Xinjiang Tianshan Coal and Electricity Co., Ltd., No.106 Mine, Changji 831200, China
In order to determine the reasonable layout position of transportation roadway in No.1803 Face of Xinjiang No.106 Mine under the insufficient caving goaf, the actual geological conditions of Xinjiang No.106 Mine was taken as the background, the reasonable layout position of No.1803 transportation was studied by theoretical analysis and numerical simulation. Through theoretical analysis, the vertical stress distribution law under the insufficient caving structure was obtained, and the theoretical range of the reasonable layout of the roadway was obtained. The geological characteristics of Xinjiang No.106 Mine were simulated by numerical software. Based on theoretical analysis, different layout schemes of transportation roadway were simulated. The results showed that the range of 35~45 m from the center of coal pillar in the upper goaf section was a reasonable layout range. In this area, the arrangement of transportation roadway could effectively avoid the high stress area.
宋 虎1，张小军2，龙 颖2，刘亚宁2, 钟建兵2. 采空区未充分垮落结构下回采巷道布置位置研究[J]. 煤炭与化工, 2025, 48(4): 14-18.
Song Hu1, Zhang Xiaojun2, Long Ying2, Liu Yaning2, Zhong Jianbing2. Study on the layout position of mining roadway under the structure of insufficient caving in goaf. CCI, 2025, 48(4): 14-18.
