Causes analysis and improved measures of the bed leakage of molecular sieve adsorber in MTO
Wu Tengteng1, Cheng Xiaoge2, Yuan Jinlin1, Li Chenguo1
1. Sinopec Great Wall Energy Chemical (Guizhou) Corporation Ltd., Guiyang 550000, China; 2. Graduate School of Chemistry and Chemical Engineering, Guizhou University, Guiyang 550000, China
Abstract：In order to solve the problems of molecular sieve leakage and pipe blockage in molecular sieve adsorber in start-up stage of new plant. The leakage during the operation of molecular sieve is described in detail，and through the analysis of molecular sieve loading, internal component inspection, operation parameters and so on，the problems in the process of molecular sieve loading, internal fixation of adsorber, pressure relief and liquid drainage were discussed. After the MTO plant shutdown, by the means of technical transformation and adjustment of operating pressure，the similar phenomenon was not occurred in the MTO plant. The results show that the qualified installation of molecular sieve bed bottom support and Wilson grid plate are quite important, the pressure relief and liquid drainage of molecular sieve adsorber is controlled at 0.1 MPa, the regeneration temperature is lower than 225 ℃, which is beneficial to the long and stable operation.
吴腾腾1，程晓格2，袁金林1，李臣果1. 甲醇制烯烃装置分子筛吸附器床层泄露原因分析及改进措施[J]. 煤炭与化工, 2022, 45(1): 121-124，130..
Wu Tengteng1, Cheng Xiaoge2, Yuan Jinlin1, Li Chenguo1. Causes analysis and improved measures of the bed leakage of molecular sieve adsorber in MTO. CCI, 2022, 45(1): 121-124，130..
