|
|
|
| Design of pneumatic pressure rope beam of mine rail truck |
| Wang Naisong, Xu Yanhui |
| Hebei Coal Research Institute Co., Ltd., Xingtai 054000 |
|
|
|
|
Abstract In order to solve the rope skipping phenomenon caused by the wear of the rope pulley during the use of the endless rope traction truck, this paper designs and develops a pneumatic rope beam device based on the operation steps that need to manually remove and install the rope pulley to prevent rope skipping in some mining areas in China. Through the linkage between the pneumatic system and the pressure rope beam structure, the device uses the pneumatic force of the cylinder to realize the compression and relaxation of the pressure rope beam to the steel wire rope, and then another cylinder completes the insertion and extraction of the pin, thus completing a working cycle. The use of the device can replace the original part involving labor, improve the safety and production efficiency of production work, and can be promoted and used in various mining areas of the same type.
|
|
|
|
|
|
| [ 1 ] 贾立辉. 新型气动压绳轮的设计[ J ]. 煤炭与化工，2020，43（ 7 ）：85 - 86，90.
[ 2 ] 许延晖. 可变速气动单轨吊驱动轴的有限元分析[ J ]. 煤矿机械，2018，39（ 11 ）：80 - 81.
[ 3 ] 许延晖，王肖一，贾立辉，等. 基于CAXA 3D的新型插爪制动牵引车的设计研究[ J ]. 煤炭与化工，2022，45（ 1 ）：106 - 108.
[ 4 ] 许延晖，王肖一. 液压制动牵引车离心释放器试验装置的设计[ J ]. 煤炭与化工，2023，46（ 1 ）：80 - 82，102. |
|
|
|
