SAPO-34催化剂的水热稳定性和反复再生研究

doi:10.19286/j.cnki.cci.2024.09.029

摘要
图/表
参考文献(13)
相关文章 (7)

全文: PDF (0 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

评价了一种水热合成法制备的SAPO-34催化剂在放大评价装置中的水热稳定性和反复再生稳定性，试验前期已经对本试验中制备的SAPO-34催化剂（样品剂）进行了催化性能的相关评价，数据表明样品剂与目前工业用催化剂（参比剂）相比较具有寿命长，产率高，E/P比值高的技术特点，样品剂的相关性能优于参比催化剂。为了进一步论证样品剂的相关性能，减小工业替换风险，本实验在100 kg固定流化床上对催化剂水热稳定性和反复再生稳定性进一步进行测试评价，以期在催化剂的工业化应用中提供参考。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘帆

关键词 ： SAPO-34, 水热稳定性, 再生

Abstract：

The hydrothermal stability and repeated regeneration stability of SAPO-34 catalyst prepared by hydrothermal synthesis method in the amplification evaluation device were evaluated. The catalytic performance of SAPO-34 catalyst (sample agent) prepared has been evaluated in the early stage of the experiment. The result show that the sample agent has the technical characteristics of long life, high yield and high E/P ratio compared with the current industrial catalyst (reference agent), and the related properties of the sample agent are better than the reference catalyst. In order to further demonstrate the relevant properties of the sample agent and reduce the risk of industrial replacement, the hydrothermal stability and repeated regeneration stability of the catalyst were further tested and evaluated on a 100 kg fixed fluidized bed in order to provide a reference for the industrial application of the catalyst.

Key words： SAPO-34 molecular sieve hydrothermal stability regeneration

作者简介: 刘帆（ 1992— ），女，山西榆社人，助理工程师。

引用本文:

刘帆. SAPO-34催化剂的水热稳定性和反复再生研究[J]. 煤炭与化工, 2024, 47(9): 142-145. Liu Fan. Study on hydrothermal stability and repeated regeneration performance of SAPO-34 catalyst. CCI, 2024, 47(9): 142-145.

链接本文:

http://www.mtyhg.com.cn/CN/10.19286/j.cnki.cci.2024.09.029 或 http://www.mtyhg.com.cn/CN/Y2024/V47/I9/142

[ 1 ]       Najafabadi A T, Fatemi S, Sohrabi M, et al. Kinetic modeling and optimization of the operating condition of MTO process on SAPO-34 catalyst[ J ]. Journal of Industrial and Engineering Chemistry, 2012, 18( 1 ): 29 - 37.
[ 2 ]       KEIL F J. Methanol-to-hydrocarbons: process technology[ J ]. M-
icroporous and Mesoporous Materials, 1999, 29(1 - 2): 49 - 66.
[ 3 ]       ST CKER M. Methanol-to-hydrocarbons: catalytic materials and their behavior1[ J ]. Microporous and Mesoporous Materials, 1999, 29(1 - 2): 3 - 48.
[ 4 ]       CHANG C D. Methanol Conversion to Light Olefins[ J ]. Catalysis Reviews-science And Engineering, 1984, ( 26 ): 323 - 345.
[ 5 ]       RABO J A, SCHOONOVER M W. Early discoveries in zeolite ch-
emistry and catalysis at Union Carbide, and follow-up in industrial catalysis[ J ]. Applied Catalysis A: General, 2001, 222(1 - 2): 261 - 275.
[ 6 ]       Wakihara, Sato K, Inagaki S, et al. Fabrication of Fine Zeolite with Improved Catalytic Properties by Bead Milling and Alkali Treatment[ J ]. ACS Applied Material& Interfaces 2010, 2( 10 ): 2 715 - 2 718.
[ 7 ]       Chen D, Moljord K, Holmen A. A methanol to olefins review: Dif-
fusion, coke formation and deactivation on SAPO type catalysts[ J ]. Microporous and Mesoporous Materials, 2012, 164( 164 ): 239 - 250.
[ 8 ]       AHMADI S M A, ASKARI S, HALLADJ R. A review on kinetic modeling of deactivation of SAPO-34 catalyst during Methanol to Olefins (MTO) process[ J ]. Afinidad, 2013, 70( 562 ): 130 - 138.
[ 9 ]       TIAN P, WEI Y X, YE M, et al. Methanol to Olefins (MTO): From Fundamentals to Commercialization[ J ]. ACS Catalysis, 2015, 5( 3 ): 1 922 - 1 938.
[ 10 ]     黄格省，李锦山，师晓玉，等. 石化企业应对煤制烯烃快速发展的策略研究[ J ]. 石油科技论坛，2020，39（ 4 ）：31 - 36.
[ 11 ]     黄格省，杨延翔，张    博，等. 我国现代煤化工产业发展现状及策略分析[ J ]. 石化技术与应用，2017，35（ 5 ）：335 - 338.
[ 12 ]     李建永，于    洋. 煤制烯烃的工业实践[ J ]. 中国石油石化，2015（ 11 ）：56 - 57.
[ 13 ]     于国良. 正视困境寻找契机——甲醇制烯烃产业发展探究[ J ]. 中国石油和化工经济分析，2015（ 12 ）：50 - 54.