|
|
|
| Lightweight design analysis of cutting reducer of roadheader |
| Huang Fujie |
| The lightweight design of the cutting reducer of EBZ200 roadheader in Wangyun Coal Mine is carried out. According to the empirical design method, the structural parameters of the sun gear, planet and inner ring of the cutting reducer are adjusted. In order to verify the feasibility of the lightweight design of the roadheader cutting reducer, the finite element simulation analysis of the planetary mechanism and the planet carrier after the parameter optimization and adjustment is carried out respectively. The results show that the adjusted planetary mechanism and the planet carrier can meet the safety production requirements of the EBZ200 roadheader in Wangyun Coal Mine. The weight of the roadheader cutting reducer is reduced by 11 %, which reduces the manufacturing cost of the reducer and achieves the design purpose. |
|
|
|
|
Abstract The lightweight design of the cutting reducer of EBZ200 roadheader in Wangyun Coal Mine is carried out. According to the empirical design method, the structural parameters of the sun gear, planet and inner ring of the cutting reducer are adjusted. In order to verify the feasibility of the lightweight design of the roadheader cutting reducer, the finite element simulation analysis of the planetary mechanism and the planet carrier after the parameter optimization and adjustment is carried out respectively. The results show that the adjusted planetary mechanism and the planet carrier can meet the safety production requirements of the EBZ200 roadheader in Wangyun Coal Mine. The weight of the roadheader cutting reducer is reduced by 11 %, which reduces the manufacturing cost of the reducer and achieves the design purpose.
|
|
|
|
|
|
| [ 1 ] 郝锦龙，董洪全. 掘进机截割部减速器动力学建模及行星架结构强度分析[ J ]. 煤矿机械，2020，41（ 10 ）：87 - 90.
[ 2 ] 胡 亮，赵国瑞，李 旭. 掘进机截割部行星齿轮传动系统断齿故障仿真分析[ J ]. 矿业科学学报，2020，5（ 4 ）：409 - 415.
[ 3 ] 刘赣华，包世阳，黄云生. 机械手减速器行星架组仿真与试验研究[ J ]. 机械设计与研究，2020，36（ 3 ）：72 - 76.
[ 4 ] 马建军. 掘进机截割部行星减速器结构的优化改进研究[ J ].机械管理开发，2021，36（ 9 ）：30 - 32.
[ 5 ] 吴 迅. 基于有限元应力分析下对差动减速器行星架设计优化[ J ]. 中国设备工程，2020（ 9 ）：90 - 91. |
|
|
|
