基于RSM的煤矸石充填材料配比优化及多因素耦合分析

doi:10.19286/j.cnki.cci.2024.07.001

Abstract
Figure/Table
References (17)
Related Citation (10)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In view of the non-applicability of orthogonal test method to the coupling of various influencing factors in the ratio design, the response surface method ( RSM ) was used to explore the influence of multi-factor coupling of fly ash(X1), cement content(X2) and slurry mass concentration(X3) on the strength formation process of filling body. The effects of three factors on the strength of filling body at different curing ages were studied. Then, a quadratic polynomial strength regression model with the compressive strength of filling body at different ages as the response target was established. Combined with variance analysis and response surface test, the influence degree and significance of each factor on the compressive strength of filling body were tested, so as to optimize the ratio of filling materials. The results showed that the compressive strength of filling body was not only affected by single factor, but also by the coupling effect of three factors. The significant order of the influence of single factor on the strength of filling body was : cement > slurry concentration > fly ash; the significance order of the influence of multi-factor coupling on the strength of filling body was : fly ash and cement > mass concentration of fly ash and slurry > mass concentration of cement and slurry. Combined with the test results and variance analysis, a set of mix ratio was selected, and its strength met the strength design requirements of general filling body.

Key words： consolidated fill interaction compressive strength regression model response surface methodology influence law

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Deng Zhiwei
	Cheng Yunhai
	Shen Hao
	Wang Yifan

Cite this article:

Deng Zhiwei,Cheng Yunhai,Shen Hao等. Optimization of coal gangue filling material ratio and multi-factor coupling analysis based on RSM[J]. CCI, 2024, 47(7): 1-6，17..

URL:

http://www.mtyhg.com.cn/EN/10.19286/j.cnki.cci.2024.07.001 OR http://www.mtyhg.com.cn/EN/Y2024/V47/I7/1

[ 1 ] 张吉雄，张强，周楠，等. 煤基固废充填开采技术研究进展与展望[ J ]. 煤炭学报，2022，47（ 12 ）：4 167 - 4 181. [ 2 ] 王金华，康红普，刘见中，等. 我国绿色煤炭资源开发布局战略研究[ J ]. 中国矿业大学学报，2018，47（ 1 ）：15 - 20. [ 3 ] 唐岳松，张令非，吕华永. 煤基固废制备充填材料配比优化试验研究[ J ]. 矿业科学学报，2019，4（ 4 ）：327 - 336. [ 4 ] 梁峰，杨晓炳，边振辉，等. 低成本绿色充填胶凝材料试验研究[ J ]. 矿业研究与开发，2019，39（ 10 ）：16 - 21. [ 5 ] 仵锋锋. 大能力低成本充填技术研究与应用[ J ]. 矿业研究与开发，2022，42（ 3 ）：22 - 27. [ 6 ] 邱继生，程坤，张如意，等. 质量分数对煤矸石基绿色充填体性能影响研究[ J ]. 非金属矿，2022，45（ 3 ）：22 - 26. [ 7 ] 韦寒波，巴蕾，高谦. 粉煤灰掺量对胶结充填体强度影响规律研究[ J ]. 矿业研究与开发，2020，40（ 12 ）：28 - 32. [ 8 ] 李新旺，赵新元，程立朝，等. 基于最佳级配的矸石胶结充填体变形和破坏特征试验研究[ J ]. 煤矿安全，2020，51（ 5 ）：78 - 82. [ 9 ] 瞿亮，王永定，高谦，等. 掺加粉煤灰混合骨料胶结充填体强度试验研究[ J ]. 化工矿物与加工，2018，47（ 9 ）：33 - 36. [ 10 ] 侯永强，尹升华，曹永，等. 基于RSM-BBD的混合骨料胶结充填体强度增长规律分析[ J ]. 材料导报，2020，34（ 14 ）：14 063 - 14 069. [ 11 ] 付自国，乔登攀，郭忠林，等. 基于RSM-BBD的废石-风砂胶结体配合比与强度试验研究[ J ]. 煤炭学报，2018，43（ 3 ）：694 - 703. [ 12 ] BOX G E P, WILSON K B. On the experimental attainment of optimum conditions[ J ]. Journal of the Ｒoyal Statistical Society: Series B (Statistical Methodology), 1951, 1( 1 ): 1 - 45. [ 13 ] 胡亚飞，李克庆，韩斌，等. 基于响应面法-满意度准则的混合骨料充填体强度发展与优化分析[ J ]. 中南大学学报（自然科学版），2022，53（ 2 ）：620 - 630. [ 14 ] ALGIN H M. Optimised design of jet grouted raft using response surface method[ J ]. Computers and Geotechnics, 2016, 74( 4 ): 56 - 73. [ 15 ] 华心祝，常贯峰，刘啸，等. 多源煤基固废充填体强度演化规律及声发射特征[ J ]. 岩石力学与工程学报，2022，41（ 8 ）：1 536 - 1 551. [ 16 ] 张新国，王华玲，李杨杨，等. 膏体充填材料性能影响因素试验研究[ J ]. 山东科技大学学报（自然科学版），2012，31（ 3 ）：53 - 58. [ 17 ] 张伟刚，邱跃琴，郭延庆，等. 基于响应面法的煤矸石胶结充填体抗压强度试验研究[ J ]. 矿产保护与利用，2022，42（ 6 ）：36 - 44.