富水泥化顶板条件下开切眼围岩控制技术研究

doi:10.19286/j.cnki.cci.2023.09.012

Abstract
Figure/Table
References (12)
Related Citation (15)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the difficulty of excavation and support of large section roadway with rich water and sludging roof, the open-off cut of No.N11511 fully mechanized mining face was taken as an example, the excavation and support technology of large section open-off cut with rich water and sludging roof was studied. Combined with the actual geological conditions on site, the parameters such as the length, diameter and row spacing of bolts and anchor cables required for the support of large section open-off cut were determined, and the process of roof grouting reinforcement, primary penetration of open-off cut and secondary roadway expansion in the early stage of working face crossheading were optimized. The results showed that the anchor beam suspension was used to replace the single column in the grouting area, which saved the occupied space and created conditions for the moving. The secondary expansion roadway was set up in advance, which effectively prevented the increase of confining pressure and achieved effective control. It provided reference for the excavation and support of large section roadway and subsequent comprehensive utilization under similar geological conditions.

Key words： rich water and sludging roof large section open-off cut grouting reinforcement roof combined support secondary expansion

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Gao Peng

Cite this article:

Gao Peng. Study on surrounding rock control technology of open-off cut under the condition of rich water and sludging roof[J]. CCI, 2023, 46(9): 48-50.

URL:

http://www.mtyhg.com.cn/EN/10.19286/j.cnki.cci.2023.09.012 OR http://www.mtyhg.com.cn/EN/Y2023/V46/I9/48

[ 1 ] 魏斌. 大断面开切眼迈步掘进一次成巷工艺技术研究[ J ]. 煤炭工程，2022，54（ 7 ）：26 - 30. [ 2 ] 刘世峰，郭鹏. 厚冲积层薄基岩大断面开切眼稳定性控制技术研究[ J ]. 矿业安全与环保，2022，49（ 1 ）：84 - 89. [ 3 ] 韩伟，高振军. 煤巷掘进工程影响因素及防治措施研究[ J ]. 煤炭科学技术，2021，49（ S2 ）：60 - 66. [ 4 ] 高奎英. 大跨度厚煤层开切眼二次成巷快速掘进技术[ J ]. 煤炭科学技术，2021，49（ S2 ）：50 - 54. [ 5 ] 陈立虎，张百胜，邸旭峰，等. 深埋大断面开切眼大厚度泥岩顶板冒顶机理及其梯次支护技术研究[ J ]. 煤炭技术，2022，41（ 1 ）：25 - 30. [ 6 ] 周刚，李胜虎. 火石咀煤矿综放工作面采煤机扩切眼技术实践[ J ]. 煤炭与化工，2021，44（ 11 ）：14 - 16，19. [ 7 ] 芦海涛，迟超飞，霍海增，等. 大坡度开切眼上山机掘快速掘进技术的研究与应用[ J ]. 内蒙古煤炭经济，2021（ 20 ）：10 - 12. [ 8 ] 李绍海，邢旭东，郑祥奇. 复杂复合顶板大断面切眼一次成巷技术研究[ J ]. 煤炭技术，2021，40（ 9 ）：15 - 18. [ 9 ] 张进鹏，刘立民，刘传孝，等. 松软厚煤层异型开切眼新型预应力锚注支护研究与应用[ J ]. 煤炭学报，2021，46（ 10 ）：3 127 - 3 138. [ 10 ] 王凯，王劲翔，李廷春，等. 复合顶板大跨度开切眼联合支护技术研究[ J ]. 矿业研究与开发，2020，40（ 6 ）：52 - 56. [ 11 ] 汪超. 大跨度开切眼巷道支护参数设计研究[ J ]. 能源与环保，2020，42（ 1 ）：156 - 168，164. [ 12 ] 周忠国，周峧洋，刘安福，等. 急倾斜中厚煤层开切眼底板治理技术研究[ J ]. 煤炭技术，2019，38（ 9 ）：88 - 90.