|
|
|
| Study on optimization of gas control parameters of ' hole instead of roadway ' in fully mechanized mining face |
| Lv Jiang |
| Jinneng Holding Group Co., Ltd., Taiyuan 030000, China |
|
|
|
|
Abstract In order to effectively reduce the gas accumulation concentration in the upper corner of fully mechanized mining face, combined with the actual situation of 18103 working face in Wangjialing Coal Industry, this paper puts forward the gas control technology in the upper corner of ' hole instead of roadway ', and designs the field test scheme. By analyzing the extraction effect of different borehole layout parameters, it is determined that the borehole diameter is 127 mm, the negative pressure of borehole extraction is about 30 kPa, and the number of branch holes is 2 best. The field application results show that the gas concentration in the upper corner of the 18103 working face is obviously reduced in the area with relatively high gas content, which can be controlled within 0.6%, and the gas concentration in the upper corner of the area with relatively low gas content can be controlled at about 0.2%, and the control effect is obvious.
|
|
|
|
|
|
| [ 1 ] 陶云奇，张剑钊，郭明功，等. 采动卸压瓦斯抽采以孔代巷技术研究与工程实践[ J ]. 矿业安全与环保，2022，49（ 5 ）：43 - 48.
[ 2 ] 马 勇. 马兰矿18502工作面以孔代巷瓦斯抽采技术研究[ J ]. 煤矿现代化，2022，31（ 2 ）：111 - 114.
[ 3 ] 郑文贤，王 凯，李全中，等. 大直径钻孔“以孔代巷”上隅角瓦斯治理参数优化及应用[ J ]. 中国矿业，2021，30（ 9 ）：145 - 149.
[ 4 ] 王建利. 韩城矿业“以孔代巷”瓦斯抽采技术研究应用[ J ]. 煤炭科技，2021，42（ 3 ）：131 - 134.
[ 5 ] 何 健，郭孝星. 大孔径“以孔代巷”高位定向裂隙带抽采钻孔瓦斯治理技术研究[ J ]. 煤，2021，30（ 4 ）：5 - 8，12.
[ 6 ] 李炎涛. 低位长距离钻孔“以孔代巷”瓦斯抽采技术研究[ J ]. 山西煤炭，2020，40（ 4 ）：46 - 51. |
|
|
|
