|
|
|
| Analysis of static and dynamic characteristics of mine pneumatic monorail crane |
| Yang Yulong |
| Majialiang Mine Jinneng Holding Coal Group, Shuozhou 036000, China |
|
|
|
|
Abstract Taking the pneumatic monorail crane bearing vehicle as the research object, the three-dimensional model of the pneumatic monorail crane bearing vehicle is established. Through the finite element pre-processing, the static characteristics of the bearing vehicle are analyzed, and the deformation stress cloud diagram under the load of 10 times the safety factor is obtained, and the location of the dangerous section and the solution are pointed out. In the modal analysis module of ANSYS Workbench, the modal analysis of the bearing vehicle is carried out, and the 1-6 order vibration mode cloud diagram and vibration characteristics of the bearing vehicle are obtained. Compared with the working frequency of the pneumatic monorail crane, it is concluded that resonance will not occur.
|
|
|
|
|
|
| [ 1 ] 侯良超. 矿用井下气动单轨吊设计研究[ D ]. 山东：山东科技大学，2021.
[ 2 ] 侯良超，宋志安，李 慧. 气动单轨吊驱动部设计研究[ J ]. 液压与气动，2018（ 7 ）：115 - 120.
[ 3 ] 石 岩. 矿用气动单轨吊的研制与应用[ D ]. 邯郸：河北工程大学，2015.
[ 4 ] 宾春雄. 基于ANSYS Workbench 的液压支架联接头的优化设计[ J ]. 煤矿机械，2020（ 5 ）：129 - 131.
[ 5 ] 张桂东，许延晖. 煤矿井下单轨吊轨道承载变形的有限元分析[ J ]. 煤矿机械，2015（ 1 ）：129 - 130.
[ 6 ] 许延晖. 露天连续剥离机截割装置设计研究[ D ]. 邯郸：河北工程大学，2013.
[ 7 ] 许延晖. 可变速气动单轨吊驱动轴的有限元分析[ J ]. 煤矿机械，2018（ 11 ）：80 - 81.
[ 8 ] 许延晖. 可变速气动单轨吊变速箱箱体的静力学和振动特性分析[ J ]. 煤炭与化工，2018（ 10 ）：97 - 100.
[ 9 ] 王东升. 基于ANSYS Workbench 的齿轮箱箱体模态及振动响应分析[ J ]. 煤矿机械，2020（ 7 ）：69 - 72.
[ 10 ] 罗春刚，杨喜海. 基于ANSYS Workbench的立式加工中心主轴箱静动态特性分析[ J ]. 机械设计与制造工程，2023，52（ 7 ）：74 - 77. |
|
|
|
