顺层钻孔有效抽采半径影响因素及布孔间距研究

doi:10.19286/j.cnki.cci.2024.02.026

Abstract
Figure/Table
References (14)
Related Citation (15)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to determine the influencing factors of gas extraction radius of bedding boreholes and the spacing of boreholes, a multi-physical coupling numerical model of gas migration was established based on the occurrence conditions of M12 coal seam in a mine in Guizhou. The effect of single factor on the extraction radius was analyzed by changing the single factor value, and the extraction radius of single borehole and multi-borehole was simulated. The results show that when the extraction time reaches 150 d, the extraction radius is calculated to be 2.2 m by the flow method. Through simulation analysis, it is found that the extraction radius increases with the extension of time, increases with the increase of borehole diameter, increases with the increase of initial permeability of coal seam, and the increase amplitude increases with the extension of extraction time, while the negative pressure of extraction has little effect on the effective extraction radius. According to the numerical simulation analysis, when the extraction time reaches 150 d, the simulation result of the extraction radius is 2.1 m. Affected by the superposition of adjacent boreholes, the extraction radius of multiple boreholes is larger than that of a single borehole. It is about 1.76 times of the extraction radius of single borehole. The research results provide a theoretical basis for the reasonable arrangement of extraction boreholes on site.

Key words： gas extraction radius numerical simulation superposition effect

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liu Yufeng

Cite this article:

Liu Yufeng. Study on the influencing factors of effective extraction radius and hole spacing of bedding boreholes[J]. CCI, 2024, 47(2): 115-119.

URL:

http://www.mtyhg.com.cn/EN/10.19286/j.cnki.cci.2024.02.026 OR http://www.mtyhg.com.cn/EN/Y2024/V47/I2/115

[ 1 ] 刘清泉，程远平，王海锋，等. 顺层钻孔有效瓦斯抽采半径数值解算方法研究[ J ]. 煤矿开采，2012，17（ 2 ）：5 - 7，37. [ 2 ] 马耕，苏现波，魏庆喜.基于瓦斯流态的抽放半径确定方法[ J ]. 煤炭学报，2009，34（ 2 ）：501 - 504. [ 3 ] 王兆丰，周少华，李志强. 瓦斯抽采钻孔有效抽采半径的数值计算方法[ J ]. 煤炭工程，2011（ 6 ）：82 - 84. [ 4 ] 徐三民. 确定瓦斯有效抽放半径的方法探讨[ J ]. 煤炭工程师，1996（ 3 ）：43 - 45. [ 5 ] 司鹄，郭涛，李晓红. 钻孔抽放瓦斯流固耦合分析及数值模拟[ J ]. 重庆大学学报，2011，34（ 11 ）：106 - 110. [ 6 ] 郝福昌，刘明举，孙丽娟. 基于多物理场耦合的瓦斯抽放半径确定方法[ J ]. 煤炭学报，2013，38（ 1 ）：106 - 111. [ 7 ] 三钧，马耕，卢杰，等. 基于瓦斯含量的相对压力测定有效半径技术[ J ]. 煤炭学报，2011，36（ 10 ）：1 715 - 1 719. [ 8 ] 余涛，卢平，孙金华，等. 基于瓦斯流量和压力测定有效抽采半径[ J ]. 采矿与全工程学报，2012，29（ 4 ）：596 - 600. [ 9 ] 郝富昌，刘明举，孙丽娟. 瓦斯抽采半径确定方法的比较及存在问题研究[ J ]. 煤炭科学技术，2012，40（ 12 ）：55 - 58. [ 10 ] 秦玉金，罗海珠，姜文忠，等. 非等温吸附变形条件下瓦斯运移多场耦合模型研究[ J ]. 煤炭学报，2011，36（ 3 ）：412 - 416. [ 11 ] 王宏图，江记记，王再清，等. 本煤层单一顺层瓦斯抽采钻孔的渗流场数值模拟[ J ]. 重庆大学学报，2011，34（ 4 ）：24 - 29. [ 12 ] 梁冰，袁新鹏，孙维吉，等. 分组测压确定瓦斯有效抽采半径试验研究[ J ]. 采矿与安全工程学报，2013，30（ 1 ）：132 - 135. [ 13 ] 张玉莹. 钻孔瓦斯抽采有效半径的数值模拟研究[ D ]. 焦作：河南理工大学，2015. [ 14 ] 康向涛. 煤层水力压裂裂缝扩展规律及瓦斯抽采钻孔优化研究[ D ]. 重庆：重庆大学，2014.