|
|
|
| Design and development of riser heat exchanger in coking plant |
| Zhang Shaojie1, Wei Xiaoling2, Liu Huan2, Zhang Changjian2, Yao Lipeng2 |
| 1. Hong Kong Polytechnic University, HongKong 999077, China; 2. Hebei University of Engineering, Handan 056000, China |
|
|
|
|
Abstract No.1 coke oven of west branch of Hangang coking plant, with rising pipe inner diameter 560 mm, height 2 950 mm, the average temperature of coke-oven gas is about 766 ℃ and the flow rate is 492.7 Nm3/h. According to the characteristics of the ascension pipe, based on the structure of the original coke oven, the new spiral coil type riser heat exchanger was designed. The heat exchanger can effectively recover the high temperature sensible heat of the coke-oven gas. It effectively solved the safety problems of traditional heat exchangers such as water leakage, unstable thermal stress, easy internal clogging, tar condensation and graphite knots.
|
|
|
|
|
|
| [ 1 ] 于清野. 缠绕管式换热器计算方法研究[ D ]. 大连:大连理工大学,2011.
[ 2 ] 杨世铭,陶文铨. 传热学[ M ]. 北京:高等教育出版社,2006.
[ 3 ] 尾华英朗. 热交换器设计手册[ M ]. 北京:石油工业出版社,1984.
[ 4 ] 杨哲君,张素军,李菊香. 盐浴螺旋盘管式焦炉上升管余热回收装置传热性能试验[ J ]. 化工进展,2015( 9 ):3 238 - 3 243.
[ 5 ] 严文福,荒煤气温度的测定与计算[ J ]. 煤炼焦化学,1984( 6 ):34 - 36.
[ 6 ] 曹先常,史 强,徐 正,等. 焦炉荒煤气显热回收的热力计算与模拟对比[ J ]. 冶金能源,2014( 5 ):24 - 27. |
|
|
|